| Operating Temperature |
32° to 122° F (0° to 50° C) |
| Storage and Shipping Temperature |
-4° to 140° F (-20° to 60° C) |
| Humidity |
5 to 95% relative humidity, non-condensing |
| Vibration |
Mil Std 810 E, Minimum Integrity Test |
| Shock |
IEC 68-2-27, 50g 6mS half sine |
| Operating Pressure |
594 to 1060 millibars |
| Weight |
17.2 lbs (7.8 kg) with multi-function cable and battery / 19.2 lbs (8.71 kg) with multi-function cable, battery, and paddles. |
| Voltage |
100-120 V, 50/60 Hz; 220-240 V, 50 Hz |
| Power Consumption |
220 VA |
| Waveform |
| Type |
ZOLL Rectilinear Biphasic |
| Energy Selection |
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 30, 50, 75, 100, 120, 150, 200 joules (Delivered into a 50-ohm load) |
| Charge Time |
Less than 6 seconds with a new, fully charged battery (first 15 charges to 200 J). Longer with depleted batteries. |
| Display Screen |
|
| Type |
Active Matrix Color LCD |
| Size |
6.5 inches (16.5 cm) diagonally |
| Resolution |
640 x 480 pixels |
| Sweep Speed |
25 mm/sec |
| Viewing Time |
4 seconds |
| Traces |
3 |
| ECG Monitoring |
| Patient Connection |
3-lead ECG cable, 5-lead ECG cable, 12-lead cable, paddles or MFE Pads |
| Input Protection |
Fully defibrillator protected |
| Special Circuit |
Prevents distortion of ECG by pacer pulse (Pacer version only). |
| Implanted Pacemaker Spike Display |
Dedicated circuitry detects most implanted pacemaker spikes with standard display marker |
| Bandwidth |
0.5-40 Hz (-3 dB) standard / 0.05-150 Hz diagnostic |
| Lead Selection |
Displayed on monitor |
| ECG Size |
0.5, 1, 1.5, 2, 3 cm/mV |
| Heart Rate |
Digital display 0-300 bpm ±5% |
| Heart Rate Alarm |
On/Off displayed on the monitor. User-selectable for tachycardia (60-280 bpm) and bradycardia (20-100 bpm) |
| Battery Specifications |
| Type |
Rechargeable, sealed lead acid |
| Weight |
3.7 lbs (1.68 kg) |
| Voltage |
2 volts/cell; 5 cells wired in series |
| Recharge Time |
7.2 hours or less with integral charger |
| Operating Time |
| 60 defibrillator discharges at maximum energy (200 J) |
| 2.5 hours minimum of continuous ECG and SpO2 monitoring |
| 1.5 hours of continuous ECG, SpO2, EtCO2, IBP, and Temperature monitoring/pacing at 60 mA, 70 bpm. |
ReviewsThere are no reviews yet.